Dust Extraction - Festool ETSC 125 Li Manual De Instrucciones

Hardness of the sanding pad
Adapted to the surface being processed, the ma-
chine can be equipped with sanding pads of differ-
ent hardnesses.
Soft: Universal for coarse and fine sanding, for flat
and convex surfaces.
Extra-soft: Fine sanding of moulded parts, arches,
radii. Do not use on edges.
Attaching sanding accessories using Stick-
Fix [4b]
The suitable StickFix sandpaper and StickFix sand-
ing cloth can be attached quickly and simply to the
StickFix sanding pad.
Affix the self-adhesive sanding accessory to the

sanding pad.
In the case of a weakening adhesive effect of
the StickFix surface, the sanding pad acces-
sories, in particular those which are not yet touch-
ing the workpiece, may come loose from the sand-
14
ing pad and cause injuries. Replace the sanding
pad!
Dust hazard
Dust can be hazardous to health. Always work

with a dust extractor.
Always read applicable national regulations be-

fore extracting hazardous dust.
Integral dust extractor with long-life dust bag
As standard, the sanders are equipped with an inte-
gral dust extractor. The sanding dust is extracted
through extraction openings in the sanding pad and
is collected in the dust bag.
4b
Installing the dust bag [5]
Slide the dust bag onto the machine until it
clicks into place.

Dust extraction

WARNING
1
5