Before Use - cecotec CookControl 8000 Manual De Instrucciones

Warning: make sure the batteries are inserted properly following the polarity marks,
otherwise, the product electronic parts could be damaged.

3. BEFORE USE

• Take the device out of its package and remove all packaging materials.
• Check carefully if there is any damage, and if there is, immediately notify the Technical
Support Service of Cecotec.
4. OPERATION
1. Place the scale on a flat, stable surface. Place a container or bowl (if used) on the scale
before operating it.
2. Gently press the On/Tare button to activate the device.
3. The display will turn on and will show 00000.
4. Wait until the LCD display shows "0".
5. Place the item to be weighed on the scale (or in a bowl if required). The LCD will show the
results.
6. Once you have finished weighing, press the On/Tare button to turn the device off. The
device will turn of automatically after 2 minutes of no operation.
Button functions
On/Manual off/Zero/Tare Unit conversion
ENGLISH
COOKCONTROL 8000 13