3. TO REPLACE BATTERIES
1) Open the battery compartment cover.
2) Remove the exhausted batteries.
3) Insert new batteries (UM-3 / AA BATTERY x 4) with polarity in correct
directions
4) Replace the cover.
4. TO USE AC ADAPTER
1) Turn the power off.
2) Connect the AC adapter (6V / 300mA ,
) to the plug.
5. RESET:
Electromagnetic interference or electrostatic discharge may cause the
display to malfunction or the contents of the memory to be lost or altered.
If it occurs, use the tip of a ball point pen (or similar sharp object) to press
the [RESET ] button at the bottom of the battery case..
RESET
-E2-