Change Canister/Tubing Set - Medela Invia Motion Instrucciones De Uso

Change Canister/Tubing Set

To be used by healthcare professionals or adequately
trained caregivers only.
Change the canister when it appears full or when the canis-
ter full signal sounds or when the canister full symbol
displayed.
1. Wash hands.
2. Switch the Invia Motion NPWT Pump off by pressing the
button and holding for 3 seconds. Press only once.
3. Disconnect the Invia Motion tubing connector from the
wound tubing connector by separating the pump from
the patient tubing.
200_4169_ifu_invia_motion_patient_EN_ES_FR.indd 21
Have a paper towel or tissue
available to cover the tip of the used
tubing to protect against wound fluid
leakage.
is
21
17/02/15 12:07