Technical Data; Electromagnetic Compatibility; Electromagnetic Emissions - Medela Invia Motion Instrucciones De Uso

Technical Data

Contact your local representative or Medela if you have questions
regarding the technical information below.

Electromagnetic Compatibility

IEC 60601-1-2, Table 1

Electromagnetic Emissions

The Invia Motion NPWT System is intended for use in the electromagnetic environment
specified below. The customer or the user of Invia Motion NPWT System should assure
that they are used in such environment. Contact your local representative or Medela if
you have questions regarding the technical information below.
Emission Tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations
/ flicker emissions
IEC 61000-3-3
WARNING
Invia Motion NPWT System should not be used adjacent to or stacked
The
with other equipment. If adjacent or stacked use is necessary, the Invia Motion
NPWT System should be observed to verify normal operation in the configuration
in which it will be used.
200_4169_ifu_invia_motion_patient_EN_ES_FR.indd 37
Compliance Electromagnetic environment - guidance
Group 1
The Invia Motion NPWT System uses RF ener-
gy only for their internal function. Therefore, its
RF emissions are very low and are not likely to
cause any interference with nearby electronic
equipment.
Class B The Invia Motion NPWT System is suitable for
use in all establishments, including domestic
establishments and those directly connected to
Class A the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Complies
37
17/02/15 12:08