Conformity Declaration - Rupes SML04 Manual De Instrucciones Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
TOOL IDENTIFICATION PLATE
POSITION AND MEANING OF INFORMATION
1 - Type of tool
2 - Air consumption at full power
3 - Working pressure
4 - Orbital diameter
5 - Tool code number or serial number
6 - Dimensions of the Polishing pad
7 - Maximum rpm
8 - Read all these instructions before operating this product
and save these instructions.

CONFORMITY DECLARATION

We declared on our responsability that the hand-held non-electric
power tool, which is mentioned in the present operating manual, is in
comformity with the Essential Requirements of Safety of the following
Directive:
2006/42/CE Machinery
The tests have been carried out in accordance with following Standards:
EN ISO 12100-1: 2003 Safety of machinery. Basic concepts, general
principles for design. Basic terminology, methodology.
EN ISO 12100-2: 2003 Safety of machinery. Basic concepts, general
principles for design. Technical principles.
UNI EN 792-7: 2008 Hand-held non-electric power tools. Safety
requirements. Grinders.
UNI EN 983: 2009 Safety of machinery. Safety requirements for fluid
power systems and their components.
UNI EN ISO 14121-1: 2007 Safety of machinery. Risk assessment.
Principles.
UNI EN ISO 3744:1997 Acoustics. Determination of sound power levels
of noise sources.
UNI EN ISO 11203: 1997 Acoustics. Noise emitted by machinery and
equipment.
UNI EN 28662-1: 1993 Hand-held portable power tools. Measurement of
vibrations at the handle.
UNI EN ISO 5349-1: 2004 Mechanical vibration. Measurement and
evaluation of human exposure to hand-transmitted
vibration.
S.p.A
IL PRESIDENTE
G. Valentini
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sml30

Tabla de contenido