Use And Maintenance - Teka TC 6400 Instrucciones Para La Instalación Y Recomendaciones De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
EN
mains, check if the voltage and
frequency match those specified on
the hob label, which is placed under
the hob or on the Guarantee card, or if
applicable on the technical data sheet,
which you must keep together with
this manual throughout the product's
service life.
The electrical connection will be via
an all-pole circuit breaker or plug,
whenever accessible, in accordance
with the current and with a minimum
3 mm distance between contacts. This
ensures disconnection in emergencies
and allows hob cleaning.
Only the TEKA official technical
service can handle or repair the
appliance, including replacement of
the power cable.
Ensure that the inlet cable does not
come into contact with the hob housing
or the oven housing, if it is installed in
the same unit.
Warning:
The electrical connection
must be properly grounded,
following current regulations,
otherwise the hob may malfunction.
Unusual high power surges
can damage the control system
(like with any electrical appliance).
Keep the Guarantee
Certificate or the technical data
sheet together with the instructions
manual throughout the product's
service life. These contain important
technical information.
8
8
2 11
3
18
U s e
Maintenance
User instructions of the
Touch Control
HANDLING ELEMENTS (fig. 2)
1
On/off touch key.
2
Hot plate selection touch keys.
3
Power and/or residual heat
displays*.
4
"Decrease" power touch key.
5
"Increase" power touch key.
6
Double burner selection touch key
(double hot plate).
7
Locking touch key for the rest of
touch keys.
8
Hot plate double zone indicatior
(only next to double burner hot
plates)*.
9
Lock icon*.
10
Timer touch key.
11
*Time set hot plate icon.
12
*Timer display
* Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
key, you only need to touch it with
your fingertip to activate the required
function.
Each action is notified by a beep.
SWITCHING ON THE DEVICE
10 12
4
5
11
2
a n d
8
9
1
6 7
8
3
When the hob is connected for the first
time, it will be locked and the related
pilot light (9) will be on. To unlock it, first
touch locking touch key
pilot light (9) switches off.
1 Touch the switching on touch key
(1) for at least one second.
The Touch Control is activated and a 0
appears with 50% brightness on all
the power displays (3).
If any zone has residual heat indication
before switch on ,the display continue
s showing ''H'' instead of 0.
If you do not take any action in the next
10 seconds the touch control will
switch off automatically.
SWITCHING ON A HOT PLATE
Once the Touch Control has been
activated by means of the touch key
(1), the power indicators of the hot
plates will display a 0 (3).
1 Press the touch key for the selected
hot plate (2). The related power
indicator ( 3 ) will be activated
and brightness of indicator will
increase.
2 Using the touch key
choose the desired power level.
The
and
touch keys are
repetitive, so if you keep them pressed
they increase or decrease with a 0.5
second interval.
Only one hot plate can be selected at
the same time
Warning:
To operate a hot plate, it must
be selected first. When you want to
use a hot plate,check the brightness
of the power indicator.After
choosing hot plate, brightness of
power indicator should increase.
Quick switch-on at maximum
power: Once you have selected the
hot plate, press the touch key
once. The hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE
(7) until the
or
(4/5),
(4)

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido