OPTION 1: Press the button on the top of the tube and pull to separate it from the handheld portion of the vacuum. There is a hook on the bottom of the handheld

portion. Hook it onto the hanger that is on the bottom portion of the tube. Wrap the cord around the two cord hooks. The unit is now ready to be stored.

OPTION 2: Use the wall mount included in the vacuum box. Drill two 5/16" holes and insert the plastic anchors (also included) into the wall. Use a Phillips head

screwdriver to screw the wall mount into the plastic anchors. Hook the bottom of the handheld portion of the vacuum onto the hanger portion of the wall mount.

For more detailed instructions, please refer to the instruction sheet included with the wall mount kit.

OPTION 1

OPTION 2

3 1

Tabla de Contenido