Description Of The Artiglio Master - Corghi Artiglio Master 26” MI Manual De Uso

WARNING
When operating or servicing equipment tie back long hair and do not wear loose-
fitting clothes, ties, necklaces, rings or wristwatches which could become entrapped
by moving parts.

DESCRIPTION OF THE ARTIGLIO MASTER

The ARTIGLIO Master is an electro-pneumatic tyre charger for car, off-road vehicle and
van wheels.
Designed to work on:
- open or closed centre conventional wheels;
- reverse rim wheels;
- runflat wheels with reinforced sidewall system;
- runflat wheels with inside support*.
*WARNING: Special working procedures have been specifically studied for these wheels' systems.
The ARTIGLIO Master makes it incredibly easy to break the bead of, demount and mount
any type of the tyres referred to above having rim diameter from 12" to 26". The machine
operates with the wheel horizontal, clamped and perfectly centred on the self-centring
turntable, in all processing stages.
Its absolutely innovative operating principle features:
- electronic presetting of the rim diameter with automatic radial positioning of the moun-
ting and demounting tools and bead breaker discs;
- a pneumatic bead breaker unit with two automatically operated, controlled-penetration
vertical two-way discs;
- a tool head with two-way vertical movement controlled from the console, allowing op-
timum tyre mounting and demounting without using the bead lifter lever;
- a pneumatically operated wheel lift for loading and unloading the wheel from the working
area (optional);
- a pneumatic support unit with automatic positioning to support the tyre during de-
mounting (optional).
The drive controls are grouped together on an ergonomic console, with a display for setting
and displaying the wheel data and a control pedal unit. The layout adopted means the
operator can work in complete safety without leaving his working position.
The ARTIGLIO Master also achieves the following:
- reduced physical effort on the part of the operator;
- no risk of damage to rim or tyre;
- the greatest possible automation of operations previously carried out by the operator
by hand.
Each machine carries a nameplate 23 fig. 8 with its identification data and some technical
data.
As well as the manufacturer's details, it carries: Mod. - - Machine model; V - power supply
voltage in Volts; A - Current absorption in Amps; kW - Power absorption in kW; Hz - Frequency in Hz;
Ph - Number of phases; bar - Operating pressure in bar; Serial N. - Machine serial number; ISO 9001
- Guarantee of certification of the company Quality System; CE - CE mark.
Artiglio Master operator's manual
EN
47