Safety Regulations - OP PNEUMATIC UNISPEED Manual De Uso

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
__________________________________________________________________________________

SAFETY REGULATIONS

1. Always make sure that the machine is placed on a stable, safe surface and that it is
not causing vibrations that, in addition to being bothersome and useless, may cause
malfunctions.
2. Leave enough room in the work zone.
3. The manufacturer accepts no responsibility for any damage caused by negligence.
4. NEVER USE the equipment before reading the user manual and
5. CAUTION ! If improperly used, the equipment may be dangerous
6. Pre-assembling operations are safe provided the regulations given below
are complied with.
7. CAUTION ! It is absolutely essential that all working operations are carried out
one operator only
8. Never attempt to use the machine above the permitted working pressures; this might
cause serious danger to the operator
9. This manual must be given to the operator and kept. The proprietor of the
equipment is responsible for it.
responsibilities.
11. Make sure that pre-assembling of the washers is always carried out in conditions of
13. Use of the pre-assembling machine is permitted only to skilled adult staff (a training
course is recommended for those who have never used the equipment.
14. During work, always follow all instructions given by the labels on the machine
15. Our equipment is designed with the technical safety features required; customers are
advised to comply strictly with the instructions given in this manual.
16. Moving parts must always be kept well greased.
UNDERSTANDING ITS CONTENTS
and may cause injury to parts of the body, which must never come
within the range of moving parts.
10. Guards must never be removed or tampered with.
safety.
12. Use gloves and adequate personal protection.
_
.
Ensure that the operator is aware of his
27
E
N
G
L
I
S
H
by