Disassembly And Exchange; Disassembling The Bus Coupler; Disposal - Aventics DDL Instrucciones De Servicio

60 AVENTICS | SERCOS III | R412012613–BDL–001–AC

Disassembly and Exchange

8 Disassembly and Exchange
8.1

Disassembling the bus coupler

Damage can occur if the device is under voltage!
Inadvertently disconnecting the voltage can damage the
product or system parts.
O
Make sure the relevant system component is not under
voltage before disassembling the device or when
disconnecting plugs.
1. Switch off the 24 V DC electronics power supply and valve
supply.
2. Remove the connected plugs.
3. Loosen the device from the work surface.
4. Remove the bus coupler.
9

Disposal

Dispose of the product in accordance with the currently
applicable regulations in your country.
NOTICE