Backrest Adjustment; Maintenance - Grammer AVENTO PREMIUM Instrucciones De Montaje

Maintenance

GB
Seat functions and operation

Backrest adjustment

Pull up the locking lever to release the backrest
catch. When releasing the backrest catch, do
not apply load to the backrest by pressing
against it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.
It should not be possible to move the
)
backrest into another position after it has been
locked.
)
When operating the adjustment
mechanisms of the seat, make sure to
keep your hands out of the area of
moving parts. Risk of injury!
)
When the backrest cushion has
been removed, the backrest frame
must be held in place before the
backrest adjustment is operated. If you
fail to do so, there is a danger that the
backrest frame may jerk forward and
cause injury.
Dirt can impair the function of the boat seat,
so make sure you keep your boat seat clean!
Upholstery does not need to be removed from
the seat frame for cleaning.
Warning! Take care with the
backrest – it may jerk forward and
cause injury!
When cleaning the backrest
cushion, the backrest must be held
in place when operating the
backrest lever.
ATTENTION: Do not clean the boat seat with a
pressure washer!
During cleaning, the upholstery must not be
soaked through.
Use standard commercially available
upholstery or plastics cleaning agents. Test
first for compatibility on a small, concealed
area.
29