STAMOS S-PLASMA 55H Manual De Instrucciones página 44

MAINTENANCE
Check the pistol for wear damage, cracks or exposed wire sections. Replace or repair
any such defects before using the device. A heavily worn pistol tip/nozzle contributes
to the reduction of speed, voltage drops and crooked cuts. An indication of a worn
pistol tip/nozzle is an elongated or oversized nozzle opening. The external part of the
electrode may be recessed no more than 3.2 mm. Replace the electrode if it is worn,
as indicated by the above measurement. If the cap cannot be reattached easily, check
the thread.
WARNING!!! Always turn off the device when replacing the electro-
des and nozzles.
Inspection
1. Device should always be grounded in safe way.
2. Always check if all terminals are properly connected.
3. Check if the power cable leads the correct voltage.
4. Pay attention at the cables and hoses – they should not be damaged or worn.
86
EN DE
Rev. 02.03.2017
MANUAL DE INSTRUCCIONES
S-PLASMA 55H | S-PLASMA 85H
S-PLASMA 125H | S-PLASMA 85CNC
S-PLASMA 125CNC
87
e x pon d o. de