Makita RU03 Manual De Instrucciones página 3

Cortador inalámbrico de pasto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Intended use of the tool
1.
Use right tool. The cordless string trimmer is
only intended for cutting grass and light weeds.
It should not be used for any other purpose such
as hedge cutting as this may cause injury.
Use only the manufacturer's recommended
2.
accessories and attachments. Use of any other
accessories and attachments may increase the
risk of injury.
Personal protective equipment
1.
Dress Properly. The clothing worn should be
functional and appropriate, i.e. it should be
tight-fitting but not cause hindrance. Do not
wear loose clothing or jewelry. They can be
caught in moving parts. Use of thick leather
gloves and substantial footwear is recom-
mended when working outdoors. Wear protec-
tive hair covering to contain long hair.
In order to avoid either head, eye, hand or foot
2.
injuries as well as to protect your hearing the
following protective equipment and protective
clothing must be used during operation of the
equipment.
3.
Always wear a helmet where there is a risk of
falling objects. The protective helmet is to be
checked at regular intervals for damage and
is to be replaced at least every five years. Use
only approved protective helmets.
4.
Use safety glasses. The visor of the helmet (or
alternatively goggles) protects the face from flying
debris and stones. During operation of the tool
always wear goggles, or a visor to prevent eye
injuries.
Wear adequate noise protection equipment
5.
to avoid hearing impairment (ear muffs , ear
plugs etc.).
6.
Work overalls protect against injury from
flying stones and debris. It is strongly recom-
mended that the user wears work overalls.
7.
Special gloves made of thick leather are part of
the prescribed equipment and must always be
worn during operation of the tool.
8.
When using the tool, always wear sturdy shoes
with a nonslip sole. This protects against injuries
from flying debris and ensures a good footing.
Use a dust mask if operation is dusty.
9.
Electrical and battery safety
1.
Avoid dangerous environment. Don't use the tool
in damp or wet locations or expose it to rain. Water
entering the tool will increase the risk of electric shock.
2.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
Use power tools only with specifically desig-
3.
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
4.
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
5.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, seek medical help. Liquid ejected from
the battery may cause irritation or burns.
6.
Do not dispose of the battery(ies) in a fire.
The cell may explode. Check with local codes for
possible special disposal instructions.
7.
Do not open or mutilate the battery(ies). Released
electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
8.
Do not charge battery in rain, or in wet locations.
Starting up the tool
1.
Make sure that there are no children or other
people within a working range of 15 meters
(50 ft), also pay attention to any animals in the
working vicinity. Otherwise stop using the tool.
2.
Before use always check that the tool is safe for
operation. Check the security of the nylon cutting
head and the guard and the switch trigger/lever for
easy and proper action. Check for clean and dry
handles and test the on/off function of the switch.
3 ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido