Thermador PROFESSIONAL SERIE Manual De Instalación Y Manteniemiento página 10

10. Use (2) 5/8" (16mm) screws to secure the wood
bracket leaving 1/4" (6mm) of each screw exposed for
hanging the hood.
1
1 "
/
8
(29mm)
3
3
(81mm)
Note:
This figure depicts transition and conduit
locations only. See Figure 3 & Figure 4 on page 5
for overall hood dimensions.
Figure 8: Transition and Conduit Locations
23" (584mm)
12 1 " (318mm)
/
2
3
2 " (69mm)
/
4
Cooktop
Centerline
Note:
Dashed line indicates cutout needed for clearance of the
transition (Figure 9).
English 8
7 7 "
/
8
(200mm)
3
2 "
/
8
(60mm)
5/8" (.16mm)
"
/
16 DIA clearance
holes for 1/2"
(12.7mm) conduit to
junction box
Base of
Hood
Location
Figure 9: Cutout Dimensions
Discharge Direction: Horizontal discharge requires a wall
cutout, as shown in Figure 9, to provide clearance for the
transition. The location of the cutout is determined by the
hood installation height.The transition supplied with the
hood connects to standard 10" (254mm) round duct.
3
2 "
/
8
(60mm)
7
"
1
/
8
(48mm)
Figure 10: Transition Centerline for Horizontal Discharge
Figure 11 shows the hood configured for vertical discharge.
Installations using this method require a cutout in the
ceiling to accommodate 10" (254mm) duct and the 1/2"
(13mm) conduit carrying power to the unit.
Figure 11: Transition Centerline for Vertical Discharge
Duct covers, sold separately, are available to cover the
space between the top of the hood and ceiling (see
Figure 13).
1
10 " (260mm)
/
4
13
5 "
/
16
Transition
(148mm)
Centerline
Wall
1
10 "
/
2
(267mm)
1
10 / "
4
(260mm)
18"
(457mm)