Description And Use; Safety - Vortice Vort Delta T WIFI Manual De Instrucciones

ENGLISH

Description and use

Vort Delta T WIFI (hereinafter "device") is a programmable multiple controller equipped with LCD display,
designed to be coupled with ceiling-mounted fans that are part of the Vortice Nordik Eco range. The device
controls the operation of a series of fans and commands on, off, speed and direction of rotation via Wi-Fi. When
set in automatic mode, the device adjusts the speed of the coupled fans to make the temperature in the room
uniform, minimising the differences detected by two probes (supplied, one to be installed at ground level and the
other near the ceiling).
See "Operation" and "Use" for a more detailed description of the various functions.
Before installing and/or using the device, read this instructions manual carefully, in particular the paragraph on
"Safety". See the leaflet provided with the product for other safety instructions and regarding disposal of the
device.
The manual must be stored with the device and remain at the disposal of qualified installation and maintenance
personnel.

Safety

Warning:
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use the device for any function other than that specified in this booklet.
• After removing the product from its packaging, ensure that it is not damaged. If in doubt please contact a
professionally qualified person or authorised Vortice Technical Assistance Centre. Never leave packaging
parts within reach of children or disabled persons.
• The use of any electric device requires compliance with a few fundamental rules, including: Never touch it
with wet or humid hands. Never touch it when barefoot. Do not allow use by unsupervised children or disabled
persons.
• Store the device away from children and persons with reduced physical capabilities when you decide to
disconnect it from the power supply and not to use it any more.
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not make changes of any kind to the unit.
• Promptly contact an authorised Vortice Technical Assistance Centre in the event of unit malfunction and/or
failure and request the use of original Vortice spare
parts for any repairs.
• If the unit falls or receives a strong blow, immediately
have it inspected at a Vortice authorised Technical
Assistance Centre.
• The electrical system to which the product is
connected must comply with regulations in place.
• The unit must be correctly connected to an effective
earthing system as foreseen by current electrical
safety regulations. If doubts should arise, request
careful inspection by qualified personnel.
• Continuous operation
temperature: 45 °C.
• The electrical specifications correspond to the ones
on the data label A (fig.1).
16
maximum environment
1 1
A