Connections Setup; Auto Select Play - Pioneer DV-868AVi Manual De Instrucciones

Initial Settings menu
Change this setting to Off if the i.LINK
interface is still connected but you need to
use one of the other outputs. Changing this
setting to Off does not affect i.LINK thru data
(i.e., if this player is between two other i.LINK
components, it will still pass data between
them).
Set back to On (i.LINK-ready) to be able to use
the i.LINK interface.

Connections Setup

You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language

Auto Select Play

Display DVD-Audio Out
Options
Speakers
i.LINK Setup
This screen shows the equipment connected
using the i.LINK interface.
Components which are able to receive
i.LINK Audio are shown in black (an i.LINK
receiver, for example); those which can't (a
DV camcorder, for example) are shown in
gray. If the player can't display the name of a
component, '****' is shown; if the name
can't be determined, Unknown is displayed.
Select the component that you want to set up
the audio output formats for.
Initial Settings
Digital Audio Out Connections Setup
Video Output
Language
Display DolbyDigital
Options DTS
Speakers MPEG
i.LINK Setup
VSX-49TXi
VSX-AX10i
DV-47Ai
VSX-49TXi : Pioneer
PCM
DTS
MPEG
This screen shows the output settings for
Dolby Digital, DTS and MPEG audio.
Depending on the other component, these
may be configured automatically. If this
player can't determine the appropriate
settings, the defaults are Dolby Digital, DTS
and PCM. If you need to change the settings,
move the cursor right and make the new
setting.
Auto Select Play
• Default setting: Off
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Initial Settings
Digital Audio Out Audio Out
Video Output Connections Setup
Language Auto Select Play
Display DVD-Audio Out
Options
Speakers
i.LINK Setup
Using this setting you can specify up to five
receivers to automatically switch input
function to this player when you start
playback of a disc. Highlight a receiver from
the list and press ENTER.
The most recently selected component is
marked with a orange box ( ). The i.LINK
output when playing Dolby Digital, DTS or
MPEG discs will be as set for this component
(see also Connections Setup above).
Select Off to reset all the settings.
08
Off
VSX-49TXi
VSX-AX10i
77
En