About Progressive Scan Video; Compatibility Of This Unit With Progressive-Scan Tvs - Pioneer DV-868AVi Manual De Instrucciones

03 Controls and displays

About progressive scan video

Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image.
Progressive scan video is available only from
the component video output. Use the
PROGRESSIVE button on the front panel to
switch the component video output between
interlace and progressive. With a DVD-Video
disc you can do this during playback, or when
the disc is stopped. For other types of disc, the
player must be stopped.
• If you connect a TV that is not compatible
with a NTSC or PAL progressive scan
signal and switch the player to
progressive, you will not be able to see any
picture at all. In this case, press the
PROGRESSIVE button on the front panel
to switch back to interlace (the
PROGRESSIVE indicator should be unlit).
• You can't switch video output when an
OSD is on-screen.
• The picture on some TVs may
momentarily break up when you switch
the video output of this player.
Compatibility of this unit with
progressive-scan TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS
ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS
TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 525/625 PROGRESSIVE SCAN
26
En
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE
CONNECTION TO THE "STANDARD
DEFINITION" OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525/
625p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
• This player is compatible with the
following Pioneer displays and monitors:
PDP-504HDE, PDP-434HDE.