Sacd Playback; Hdmi Settings - Pioneer DV-868AVi Manual De Instrucciones

Initial Settings menu
Some DVD-Audio discs contain DVD-Video
content in addition to the DVD-Audio. Set to
DVD-Video to play a DVD-Audio disc as if it
were a DVD-Video disc. Note that in this case
only the DVD-Video part of the disc will play.
• This setting reverts to DVD-Audio
(default) when the disc tray is opened, or
the power is switched into standby.

SACD Playback

• Default setting: 2ch Area
Initial Settings
Digital Audio Out Parental Lock
Video Output Bonus Group
Language Auto Disc Menu
Display Group Playback
Options DVD Playback Mode
Speakers SACD Playback

HDMI Settings

i.LINK Setup
SACD discs can be divided up into several
different areas — stereo audio (2ch Area),
multi-channel audio (Multi-ch Area) and, for
hybrid SACDs, standard CD audio (CD Area).
Select which you want to listen to.
• For multi-channel audio from the i.LINK
(DV-868AVi only) and 5.1 channel analog
outputs, SACD playback must be set to
Multi-ch Area.
• If you select an area that isn't on the disc
loaded, a different area of the disc will
play. For example, if you choose standard
CD audio but the disc loaded is not a
hybrid SACD, the stereo SACD audio will
play.
HDMI Settings
You only need to make this setting if you
connected this player to an HDMI-compatible
component using the HDMI connector.
After selecting HDMI from the Initial Settings
menu, the HDMI settings menu appears. For
example, if you connected a Pioneer display,
the following menu should be displayed with
the component name showing where
2ch Area
XXXXXX appears below:
Multi-ch Area
CD Area
With DVI/HDCP-compatible devices, the
same screen is shown, but with the audio
setting grayed-out (there is no audio with
DVI):
• Use the joystick (up/down) to select a
• Use the joystick (left/right) to adjust the
• After you've finished, press ENTER to
Initial Settings
Digital Audio Out Parental Lock
Video Output Bonus Group
Language Auto Disc Menu
Display Group Playback
Options DVD Playback Mode
Speakers SACD Playback
i.LINK Setup HDMI Settings
XXXXXX
Resolution
Aspect Ratio
Video Memory
Audio
Resolution
Aspect Ratio
Video Memory
Audio
setting.
current setting.
confirm any settings you've made and
return to the Initial Settings menu.
3 Off (jp)
3 On
3 Single
3 DVD-Audio
3 2ch Area
720x480 P
16:9
Direct
LPCM
720x480 P
16:9
Direct
LPCM
08
71
En