Setting The Timer - Dometic CoolAir RTX1000 Instrucciones De Uso

Using the parking cooler
7.9

Setting the timer

The parking cooler is fitted with a timer. Once the set time has elapsed in the
timer, the parking cooler automatically switches off.
If the timer is activated, the display alternates between the set temperature
and the duration.
Control panel
➤ Press the
➤ Press the
in 10 minute intervals.
➤ Press the
Remote control
➤ Press the
10 minute intervals.
The maximum running time is 120 minutes.
➤ To save the value don't press any button for more than 5 seconds.
To reset the timer to 0 minutes, proceed as follows:
➤ Press the
➤ Press the
➤ To save the value don't press any button for more than 5 seconds.
20
button until the
or button to set the required running time of the timer
button to save the value.
button to increase the required running time of the timer in
button until the timer shows 120 min.
button again.
CoolAir RTX1000, RTX2000
symbol appears.
EN