Storing Dab Services In Memory - JVC KD-G302 Manual De Instrucciones

Ocultar thumbs Ver también para KD-G302:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3
Start searching for an ensemble.
To search for ensembles of
higher frequency
To search for ensembles of lower frequency
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
To select the next service (If a
primary service has some
secondary services, they are
selected before the next
primary service is selected.)
To select the previous service (either
primary or secondary)
To change the display information while
tuning in to an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (display) repeatedly.
Each time you press the button,
the following information appears
for a while on the display.
Ensemble name
Channel number
Service name
Frequency
Clock
To tune in to a particular ensemble
without searching
Before you start....
Press FM/AM DAB briefly if CD, CD changer, or
external component is the current source.
1
Press and hold FM/AM DAB to select DAB
tuner as the source.
2
Press FM/AM DAB repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
Press and hold ¢
3
than one second.
Press ¢
4
or
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the
button.
Press 5 (up) or ∞ (down) to select a service
5
(either primary or secondary) you want to
listen to.
To restore the FM/AM tuner
Press and hold FM/AM DAB again.
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
Before you start....
Press FM/AM DAB briefly if CD, CD changer, or
external component is the current source.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
DAB
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
DAB1
CONTINUED ON THE NEXT PAGE
4 for more
or
4 repeatedly until the
FM/AM
DAB2
DAB3
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-g301

Tabla de contenido