baltur TBG 45 PN Manual De Instrucciones página 17

BURNER X
TBG 45PN 3 ÷31
TBG 60PN 6÷ 34
X= Distance between combustion head and disk; adjust the
distance X following the indications below:
a) slacken screw 1
b) turn screw 2 to position the combustion head 3, referring
to index 4.
c) adjust the distance X between minimum and maximum
according the indications in the table.
IMPORTANT The above adjustments are indicative only;
position the combustion head according
to the characteristics of the combustion
chamber
COMBUSTION HEAD ADJUSTMENT SCHEME
Value indicated by
index 4
0 ÷ 3,2
0 ÷ 3,2
INSERTION AND DISINSERTION LEVER
MOTOR CONNECTION CAMSHAFT
REFERENCE SCALE
I
II
III
IV
TO MODIFY THE REGULATION OF THE CAMS UTILIZED, OPERATE THE
RESPECTIVE RINGS (I - II - III - IV). THE INDEX OF THE RING INDICATE ON
THE RESPECTIVE REFERENCE SCALE THE ROTATION ANGLE TAKEN UP
FOR EACH CAM.
15 / 18
0006081367_201011
CAMS REGULATION SERVOMOTOR
SQN72.6A4A20 FOR TBG ...PN
MAXIMUM AIR OPENING CAM (90°)
TOTAL AIR CLOSURE (BURNER AT STANDSTILL (0°)
MINIMUM AIR OPENING (LESS THAN CAM IV) (0°)
AIR OPENING FOR IGNITION (MORE THAN CAM III) (20°)
ADJUSTABLE CAMS
POSITION
INDICATOR
E
N
G
L
I
S
H