Installation Procedure Sds30Wc - Thermador Masterpiece and Professional Series Guía Para La Instalación

Installation Procedure SDS30WC

The SDS30WC storage drawer is specifically designed to
only be used with the single steam ovens MEDS301WS
and PODS301W.
Notes
The cutout dimensions in this manual for the
▯
SDS30WC are for reference only. For complete unit
and cabinet dimensions refer to the installation guide
included with the steam oven.
The storage drawer combined with the steam oven
▯
allows for the replacement of a standard single wall
oven.
The steam oven is shorter than a standard wall oven.
▯
The storage drawer when combined with the steam
oven allows for a direct replacement of a standard wall
oven.
The drawer is functional storage drawer for the trays
▯
and racks supplied with the steam oven.
WARNING
9
Do not repair, replace or remove any part of the
appliance unless specifically recommended in the
manuals. Improper installation, service or
maintenance can cause injury or property damage.
Refer to this manual for guidance. All other servicing
should be done by an authorized servicer.
NOTICE: This unit utilizes a special ball bearing slide
and locking feature called "Push to Open" (PTO). This
feature allows for a design without a handle and a flush
installation option.
12
There are two PTO slide assemblies installed in this unit,
one on each side. A slide is mounted to each side of the
housing and corresponding rails are mounted to each
side of the drawer. (Only one side is shown in picture for
clarity).
A Slide
B Rail
During installation or service (cleaning) it may be desired
or recommended to remove the drawer from the unit to
simplify or aid in installation or service. Special care and
specific steps are recommended to ensure no damage is
done to the PTO mechanism.