Before You Begin; Tools And Parts Needed; Parts Included; Power Requirements And Grounding - Thermador Masterpiece and Professional Series Guía Para La Instalación

Before you Begin

Tools and Parts Needed

T-20 star head screwdriver
▯
Measuring tape
▯
Drill with bit (1/8")
▯

Parts Included

T-20 star head screws, #8 x 1/2" (6)

Prepare Installation Space

Cabinet and Cutout Information

Instructions are based on standard (in the U.S.A.)
cabinets 36" (914 mm) high and 24" (609 mm) deep
with a 25" (635 mm) countertop. If using non-standard
cabinets, alter dimensions accordingly.

Unit Dimensions SDS30WC

Maximum weight capacity for the storage drawer is 40
pounds (18 kg).
Note: The dimensional drawing is for reference only.
Refer to the installation guide included in the steam oven
for unit and cabinet dimensions.
6

Power Requirements and Grounding

Circuit Specifications: 120V, 15A, 60Hz
The outlet must be properly grounded in accordance with
all applicable codes.
It is the responsibility of the installer to comply with local
codes. If no local codes are applicable, wire in
accordance with the National Electric Code, ANSI/NFPA
70-latest edition.
P r e p a r e I n s t a l l a t i o n S p a c e
Unit and Cabinet Dimensions WD30W /
WD30WC / SD30WC
Note: Power cord for the warming drawer units is 84"
(2134mm) long.
Cabinet opening bottom must be able to support
110 pounds (50 kg).
Flush Installation