SUPER TOP
Functioning
5.7 - USER MENU (Fig. 7)
Select the "
" icon to access the menu
This menu can be used to select and set all functions
on user level.
Use the knob to point to the icons and set the respective
parameters:
1. Language
This can be used to set the language by selecting
the respective flag.
2. SERVICE MENU
This menu is for "OEM" or specialised personnel use
only and is password-protected.
3. AUTO POWER-ON TIMER
The time, date and program for automatic power-on
of the oven can be set.
4. CALENDAR
The current date and time can be set.
5. ECO
The oven switches to ECONOMY mode after a
certain time (programmable). The chamber light is
switched off, the chimney is closed and the chimney is
closed but temperature is maintained in the chamber.
Baking settings are resumed when the oven door is
opened.
5.7.a - Door functions
The following functions may be performed automatically
when the door is opened:
• Ceiling heating elements on to prevent temperature
drops (6a).
• Enable a warning buzzer if the door remains open
for more than one minute (6b).
• Set an operating time of the extractor at maximum
speed to remove baking steam after the product is
taken out of the oven; the time can be set between
0 and 25 seconds (6c).
• Set a delay time to open the chimney after the door
is closed (product in oven) (6d).
IMPORTANT
The enabled functions show a red tick over
the icon.
• Select the icon (7) to quit the user menu.
3
4
5
6a
6b
6c
6d
FIG. 7
1
2
6
7
EN - 25