Korg SDD-3000 PEDAL Manual De Usuario página 18

3.
With the channel A and B foot switches, select the program channel.
When a channel is selected with the A and B foot switches,
bank selection mode is canceled, and the LED for the
selected channel lights up. The PROGRAM display changes
from blinking to lit up.
When the bank selection mode is canceled, the delay time
can be set with the TAP/BANK DOWN foot switch.
Setting the delay time
With the SDD-3000 PEDAL, a delay time can be set in advance, but also, the delay time can be
adjusted to the tempo of a song that's being played.
Setting the delay time as time
1.
Press the TAP/BANK DOWN foot switch with the tempo of the song being played.
The interval between presses of the foot switch will be set as the delay time. The delay time is
shown on the TIME/VALUE display, and the LED of the TAP/BANK DOWN foot switch blinks.
Both the left and right channels will be set to the same delay time.
Setting the delay time as a note
1.
Simultaneously press the R TIME and FINE buttons in the DELAY TIME section, and the
SYNC LED lights up.
When SYNC is on (SYNC LED lights up), the delay time will be set as a note synchronized to
the tap tempo set with the TAP/BANK DOWN foot switch.
Note: The SYNC setting will be saved with the programs.
2.
With the DELAY TIME knob in the DELAY TIME section, select a note.
There are 11 note settings, from a whole note (1-1) to a thirty-second note (1-32).
The delay time will be synchronized to the tap tempo as shown and set as the selected note.
18
Channel A
TAP TAP
Channel B
TAP TAP TAP