Front.panel - Korg SDD-3000 PEDAL Manual De Usuario

Front panel
Programmable sections of the SDD-3000 PEDAL
Since the area indicated in the illustration is controlled by a CPU, 80 programs (40 banks×2) can be
saved. These programs consist of settings for the delay type, delay time, regeneration, modulation,
effect (BALANCE), ducking and pedal assignment in addition to MIDI and system settings (basic
SDD-3000 PEDAL settings).
1. SWITCH
1. TAP/BANK DOWN foot
switch
Use this foot switch to set the
delay time. Press the TAP/
BANK DOWN switch two
times. The interval of time
between the two button presses
will be set as the delay time.
In bank selection mode, pressing
this foot switch will decrease the
bank number.
2. BANK UP foot switch
In bank selection mode, pressing
this foot switch increases the
bank number.
3. Channel A and B foot
switches
Use these foot switches to
choose the channel for the
selected bank.
Also, pressing the foot switch
for the selected channel turns
off (bypasses) the effect.
See page 17 "Selecting a pro-
gram".
1
* The shaded part (
the illustration indicates the
part of the SDD-3000 PEDAL
that's described in this section.
2
) of
3
7