Midi.and.system.settings; Setting Procedure - Korg SDD-3000 PEDAL Manual De Usuario

MIDI and System settings
Global settings (function settings) for the SDD-3000 PEDAL and MIDI settings can be specified,
and a bulk dump of the data can be performed.

Setting procedure

1.
Press the MIDI/SYS button to enter MIDI/SYS setting mode.
When MIDI/SYS setting mode is entered, the MIDI/SYS LED blinks. The abbreviation of the
selected function name is shown on the TIME/VALUE display.
When MIDI/SYS setting mode is entered, the functions change for the buttons and knobs
on the front panel, and the effects cannot be used.
When in MIDI/SYS setting mode, do not disconnect the cable from the INPUT (L/MONO)
jack to turn off the SDD-3000 PEDAL.
2.
With the R TIME and FINE buttons, select the function to be set.
The function to be set or the data to be bulk dumped is shown on the TIME/VALUE display.
3.
With the WRITE and EXIT buttons, select the setting.
The setting for the selected function is shown on the PROGRAM display.
To change the setting for another function, select the function with the R TIME and FINE
buttons, and then select the setting with the WRITE and EXIT buttons.
4.
Press the MIDI/SYS button to return to the effects.
22
1
3
2
4