Technical Specifications - Bushnell TROPHY CAM 119435 Manual De Instrucciones

4. Try to avoid setting the camera up on small trees that are prone to
being moved by strong winds.
5. Remove any limbs which are right in front of the camera lens.
PIR Sensor LED Flashes/Doesn't Flash
1. When the camera is in the "Setup" mode, a special LED on the front
of the camera will flash when it senses motion. This is for setup
purposes only and will help the user aim the camera.
2. During use, the LED will not flash when the camera takes an image.
This is to help keep the camera hidden from game.
LCD Screen Issues
1. LCD screen powers on but no text is present.
a. After moving the switch from "Off" to "Setup" or "On", make sure
that the switch is correctly in position to ensure the proper mode
(avoid positions "between" two modes).
b. Do not move the switch directly from "On" to "Setup"-always
move the switch all the way down to "Off" first, then back up to
"Setup".
2. LCD screen shows a faint black line after turning from "Setup" to "On".
a. The LCD will turn off when you slide the switch to the "On"
position. In some cases, this black line will appear and then fade in
about 1 second. This is normal and the camera will function properly.
3. Screen comes on but then powers off
a. Make sure that you have installed the SD card correctly.
Camera won't retain settings
1. Make sure that you have been saving the changes to any parameter
settings that you made while in Setup mode, by pressing "OK" after
changing the setting. If you don't save your new setting after changing
it, the camera will continue to use the original default setting for that
parameter.
28

TECHNICAL SPECIFICATIONS

Image Sensor 5 Megapixel Color CMOS
Maximum Pixel Size 3264x2448 (8MP)
Lens F=3.1; FOV=50°; Auto IR-Cut-Remove (at night)
IR-Flash Range 36'-45' (12m-15m)
Std B&W Display: 24x32mm(1.5") ; Color Display:
Display Screen
32x42mm (2")
Memory Card SD or SDHC Card, Maximum capacity 16GB
Internal RAM 32MB
8MP = 3264x2448; 5MP = 2560x1920; 3MP =
Picture Size
2048x1536
Video Size 720x480/30 fps, 640x480/30fps, 320x240/30fps
PIR sensitivity PIR with 3 sensitivity levels: High/Normal/Low
Operation Day/Night
Response Time 1s
Triggering Interval 1sec. - 60min. programmable
Shooting Numbers 1— 3 programmable
Video Length 5-60sec. programmable
Power Supply 8xAA recommended, 4xAA as emergency power
Stand-by Current < 0.3mA(<7mAh/day)
Power Consumption 200mA (+530mA when IR-LED lighted)
User Interface LCD display
TV out (NTSC/PAL); USB; SD card holder; 6V DC
Interface
external
Security Strap; ¼-20 attachment
Operating
-20 - 60°C (Storage temperature: -30 - 70°C)
Temperature
Operating Humidity 5% - 90%
Security
FCC/CE/RoHs/WEEE
authentication
29