Technical Specifications - Bushnell CORE 119936C Manual De Instrucciones

Moisture or Ants Inside Camera
1. To ensure humidity or rain is kept out of the camera, secure the DC In plug firmly in place.
2. Ants can be attracted by low level electronic vibrations, and enter through any gaps between the
exterior and interior of the camera. Make sure the DC In plug is securely attached.
Field Scan (Time Lapse) not working properly
1. Make sure that the stop and start times of Field Scan "A" and "B" do not overlap (for example, do not
set the start time of "B" to 8AM if the stop time of "A" is 10AM).
2. When using Field Scan in video mode, the smallest interval time available is 5 min, to avoid potential
overheating of the batteries and electronic components, which could cause operational failure or
damage to the camera. In still photo mode, a 1 min. Interval can be set.
CAUTION: DO NOT USE the 0.6s Interval setting for Video at night at a feeder or similar environment. It
may cause the LEDs to continue firing over a long period of time, which may overheat and shorten the
operating life of the internal electronic components.
Do not mix old and new batteries.
Do not mix battery types-use ALL lithium or ALL alkaline.
Rechargeable batteries are not recommended.

TECHNICAL SPECIFICATIONS

Maximum Pixel Size
119936C/119938C: 6528x3672 (16:9)
119975C/119977C: 7296x4104{16:9)
Lens F = 2.8;
FOV=38°;
IR-Flash Range
Selectable (Low/Med/High), >100ft/30m (119975C/119977C),> 100ft/30m (119936C/119938C)
Display Screen
Monochrome Display (119874C/119876C: 21x30mm(1.5")
Color Display (119875C/119877C only): 2.4"
Memory Card
SD or SDHC Card, Maximum capacity 32GB (Class 6 or higher for 1280x720 or 1920x1080 HD video)
Picture Size (pixels)
Video Size
640x360p, 1280x720p, 1920x1080p @ 30 fps (Day)/ 15 fps (Night)
1280x720p, 1920x1080 @ 30 fps (Day) / 30 FPS (Night), 1920x1080 @60 fps (Day) / 60 FPS (Night)
3MP=2304x1296, 8MP=3840x2160, 24MP=6528x3672
3MP=2304x1296, 8MP=3840x2160, 30MP=7296x4104
24