Control Elements - Abicor Binzel MFS-V3 eBOX Instructivo De Servicio

7 Operation
7 Operation
NOTICE
• The eBOX may only be operated by qualified personnel (in Germany see TRBS 1203).

7.1 Control elements

1 2
17
16
15
14 13
1 eBOX status LED P1
2 Key-operated switch S1
3 Reset button S2
4 Front drive status LED P2
5 Rear drive status LED P3
Fig. 11 eBOX control elements
Symbol Name
Main switch Q1 (16) Fig. (11)
I ON
Switching state ON (LEDs illuminated in green, device fans running)
O
OFF
Switching state OFF (no power to the system)
Key-operated switch S1 (2) Fig. (11)*
Auto
Switch position: automatic: the wire feeder is fully functional when the cover (M-Drive) is closed
Service
Switch position: manual: the protective device is bridged. The inching (wire feed) function is enabled
when the cover (M-Drive) is open. The key can be removed in any position.
* Solely for systems with M-Drive; obsolete for other versions.
Reset button S2 (3) Fig. (11)
Press the button after eliminating a fault. The internal control system is reset to the starting position.
LED P3, rear drive (5) Fig. (11)
Status green = ready, status red, flashing = fault
LED P2, front drive (4) Fig. (11)
Status green = ready, status red, flashing = fault
EN - 18
3 4 5
12 11
6
Outlet air grille
7 Manual terminal port X10
8 Hot wire power source port X13
9 Option
6
10 9
10 Option
11 Control lead port
M-Drive or MF1 X11
12 US1/US2 port X3
(on AIDA version only)
eBOX
8 7
13 I/O interface port X2
14 Inlet air grille
15 Mains cable port X1
16 Main switch Q1
17 Ethernet/USB interface
BAL.0388.0 • 2018-08-08