Maintenance And Cleaning - Abicor Binzel MFS-V3 eBOX Instructivo De Servicio

eBOX
8 Decommissioning
NOTICE
• Please make sure that the shutdown procedures for all components mounted in the welding system are strictly observed
before putting out of operation begins.
 Fig. 11 eBOX control elements on page EN-18
1 Use the main switch (16) to cut the power to the eBOX.

9 Maintenance and cleaning

Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be followed during all maintenance, servicing, assembly, disassembly, and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Close off the gas supply.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Maintenance and cleaning work may be carried out only by qualified personnel (in Germany see TRBS 1203).
• Always wear your personal protective equipment when performing maintenance and cleaning work.
BAL.0388.0 • 2018-08-08
8 Decommissioning
EN - 19