Maintenance Intervals - Abicor Binzel MFS-V3 eBOX Instructivo De Servicio

9 Maintenance and cleaning

9.1 Maintenance intervals

NOTICE
• The specified maintenance intervals are standard values and refer to single-shift operation.
1 Air grille – housing air inlet
Fig. 12 Overview of the pin assignment
When using arc welding equipment, always observe the provisions of EN 60974-4 Inspection and testing, as well as any
national laws and regulations.
Check the following:
Weekly
-
Tab. 14 Maintenance and cleaning
EN - 20
Monthly
Check, clean and, depending on the level of dirt, replace the air filters.
1 Open the air grilles (1) and (2) (snap-on closures), remove the air filters
and air blast with dry compressed air. Replace the filters if necessary.
2 Insert the air filters into the air grilles (1) and (2) and re-attach the air
grilles (1) and (2) to the housing.
1
2
2 Air grille – housing air outlet
eBOX
Quarterly
-
BAL.0388.0 • 2018-08-08