Sony VPH-D50HTU Manual De Instalación página 40

For Remote Control RM-PJ1001
@™ SWITCHER/VIDEO MEMORY/INDEX select
switch
SWITCHER: This key does not function with this
projector.
VIDEO MEMORY: To select the preset or adjusted
data.
INDEX: This key does not function with this
projector.
@£ SWITCHER/VIDEO MEMORY/INDEX keys
Select the video memory number or OFF when the
SWITCHER/VIDEO MEMORY/INDEX select switch
is set to VIDEO MEMORY.
@¢ INPUT SELECT keys
Select the input signal.
VIDEO: The signal input from the VIDEO IN or S
VIDEO IN (or Y/C IN) connectors
SELECT VIDEO/S VIDEO: Selects the signal input
from the VIDEO IN or S VIDEO IN (or Y/C IN)
connectors after pressing the VIDEO key.
A: The RGB, component or HDTV signal input from
the INPUT A connectors
B: The RGB, component, HDTV, S video or video
signal input from the INPUT B connectors
C, D: These keys do not function with this projector.
Note
To switch the input signal from the INPUT A or INPUT B to
the S VIDEO IN (or Y/C IN) connectors, first press the
VIDEO key, then press the SELECT VIDEO/S VIDEO key.
@∞ SYS SET key
This key does not function with this projector.
40
(GB) Before adjustment
@§ BLKG (blanking) key
Enters the blanking adjustment mode.
You can adjust the blanking with the four arrow keys.
For details, see "Blanking Adjustment" on pages 91 (GB)
and 93 (GB).
@¶ PATTERN key
Displays the internal test patterns of the projector.
Each press of the key advances the test pattern
sequentially.
In the focus, registration or white balance adjustment
mode, only the test patterns suitable for the adjustment
will be displayed.
For details, see "Test Patterns" on page 56 (GB).
@• LCD LENS CONTROL keys
These keys do not function with this projector.
@ª NORMAL key
Erases the test pattern or cancels the various
adjustment modes.
#º MUTING keys
PIC (Picture): Cuts off the picture. To restore the
picture, press the key again.
AUDIO: This key does not funcion with this projector.