SCHOLTES BC 99P S Manual De Instrucciones página 34

Programming the automatic cleaning end time
GB
1. Press the button until the
numerical digits on the DISPLAY begin to flash.
2. Turn the SET TIME knob towards " " and " " to adjust
the time.
3. Press the button again, until the other numerical digits
on the DISPLAY begin to flash.
4. Turn the SET TIME knob towards " " and " " to adjust
the minute value.
5. Press the button again to confirm.
6. Once the set time period has elapsed, the text END
appears on the DISPLAY and a buzzer sounds.
• For example: it is 9:00 and you have selected the
Economy (ECO) PYROLYTIC mode, which has a default
time of 1 hour. The end of the cycle is scheduled for
12:30, meaning it will begin automatically at 11:30.
If programming has been scheduled and confirmed, the
e buttons will be illuminated. The duration and
the PYROLYTIC end time will appear alternately on the
DISPLAY.
At the end of the automatic cleaning cycle,
you will have to wait until the temperature inside the oven
has cooled down sufficiently before you can open the
oven door. You will notice some white dust deposits on the
bottom and the sides of your oven; remove them with a
damp sponge once the oven has cooled down completely.
If, on the other hand, you wish to make use of the residual
heat inside the oven, you do not have to remove the dust
deposits as they are completely harmless and will not affect
your food in any way.
34
icon and the two