Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW500 Guía De Instalación, Configuración Y Operación

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
This guide contains important information
„
fo r th e c o r re c t u n d e r s t a n d i n g and
proper operation of this CFW500-RS232
Communication Plug-in Module.
O n l y u s e t h e C F W 5 0 0 - R S 2 3 2
„
C o m m u n i c a t i o n P l u g - i n M o d u l e
(CFW500-CRS232) in CFW500 WEG
inverters.
We recommend reading the CFW500
„
user's manual before installing or operating
this accessory.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories to the frequency inverter
CFW500.
Wait at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide shows how to install, configure and
operate the CFW500-RS232 Communication Plug-in
Module. This plug-in is used in to CFW500 Universal
Asynchronous Receiver Transmitter (UART) interface
in RS232 physical layer. The CFW500-CRS232 allows
the PC serial communications for inverter commands,
reference and variables monitoring, as well as SoftPLC
debugging and programming. For further information
about this refer to the CFW500 "Modbus RTU user's
manual" and "SoftPLC manual " in the CD-ROM.
RS232 Communication Plug-in Module
CFW500 | 5