Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The COMPACT 235 is designed for the automatic
and manual washing of spray guns and parts
using both clean and recirculation solvent. It is
fully pneumatic and uses a double diaphragm
pneumatic pump to function.
The structure is made entirely from stainless steel
AISI304.
The lower cabinet of the machine is designed to
contain the two drums of the clean and recircula-
tion solvent for washing and rinsing. The manual
6.1. MAIN COMPONENTS
1. Control panel
2. Lowel door
3. Basement
4. Automatic washing tub
5. Fume cupboard
6. Cigar filter with suction dirt and recycled (dirt)
7. Cigar filter with suction brush (dirt)
8. Draft tube spray (transparent) (clean)
9. Draft tube rinse (clean)
10. Filter "Paint Stop"
11. Plate CE
12. Work cabin
13. Earthing cable
14. Hole connection "earthing"
15. Quick coupling for compressed air grid
16. Brush
17. Exhaust pipe
18. Air gun
14
13
5. EQUIPMENT IDENTIFICATION
6. MAIN COMPONENTS OF THE MACHINE
8
9
6
7
and automatic washing operations are perfor-
med in the upper part of the machine, called the
tub level. The washing tub is fitted with a system
for the extraction and expulsion of noxious
vapours.
Inside the tub there is the washing spray jet
system where all the components of the spray
guns can be appropriately placed. Other small
objects may also be positioned and washed
inside the tub. The machine is also equipped with
an air blow gun to dry the washed spare parts.
12
1
2
15
16
17
- 15 -
11
18
3
14
10
5
4
Publicidad
Tabla de contenido
