Description Of The Equipment; Main Components - Sagola DOBLE 250 Manual De Instrucciones

The Doble 250 is the unión of two independent
machines joined by the same air supply connection.
It´s designed for the automatic and manual was-
hing of spray guns and parts using clean, recircu-
lating solvent and water.
It is fully pneumatic and uses a double diaphragm
pneumatic pump to function.
The Doble 250 is a machine that has been manufac-
tured completely in stainless steel AISI 304.
The machine is composed of a right-hand part used
for washing with water and a left-hand part for
washing with solvent, the characteristics of which
are shown as follows:
The right-hand part, with the WATER WASHING,
consists of 3 tanks:
1) Upper tank used for manual washing of parts,
containing a working grid on which the clean objects
can be placed. A pneumatic mixer is located inside
the tank that is needed to mix the flocculant and the
dirty paint water.
2) Intermediate tank, called the filtering tank, where
the filter is positioned that stops the paint, letting the
clean water pass into the lower collecting tank.

MAIN COMPONENTS

Air inlet connection
1
Fume cupboard
2
Brush
3
Working area (Solvent)
4
Working area (Water)
5
Control panel
6
Tank area
7
Hole connection "earthing"
8
Earthing cable
9
8
9

5. DESCRIPTION OF THE EQUIPMENT

3
4
6
3) Lower tank, called the collection tank, from which
a pneumatic pump aspirates the filtered water,
allowing it to return to the washing cycle.
The washing of parts that are dirtied with Paint takes
place manually with the atomizer brush with a relati-
ve drip course, which allows the cleaning of parts
with filtered water and the blower gun.
The left-hand side is suitable instead for automatic
WASHING with guns and various parts using clean
SOLVENT.
The lower cabinet of the machine is designed to
contain the two drums of the clean and recirculation
solvent for washing and rinsing. The manual and
automatic washing operations are performed in the
upper part of the machine, called the tub level.
The machine is equipped with a system for the
extraction and expulsion of noxious vapours with
venturi effect.
Inside the tub there is the washing spray jet system
where all the components of the spray guns can be
appropriately placed. Other small objects may also
be positioned and washed inside the tub. The machi-
ne is also equipped with an air blower gun to dry the
washed spare parts.
1
7
- 22 -
2
3
5
6