Safety Precautions; User; Rotor And Accessories; Measures For Your Protection - OHAUS Frontier FC5714 Manual De Instrucciones

Ocultar thumbs Ver también para Frontier FC5714:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

EN-2
Warning and information signs on the surface of centrifuge

1.4 Safety Precautions

1.4.1 User

OHAUS centrifuges are intended exclusively for indoor use and for use by qualified personnel. This device may
only be operated by trained specialist staff. They must have carefully read the operating manual and be familiar
with the functions of the device.

1.4.2 Rotor and accessories

Only OHAUS original rotors and accessories shall be used. Any other use or intended use is considered improper.
OHAUS is not liable for damage resulting from improper use.
CAUTION:
Read all safety warnings before installing, making connections, or servicing this equipment. Failure to
comply with these warnings could result in personal injury and/or property
damage. Retain instructions for future reference.

1.4.3 Measures for your protection

WARNING: Never work in an environment subject to explosion hazards! The housing of the instrument is
not gas tight. (Explosion hazard due to spark formation, corrosion caused by the ingress of gases)
WARNING: When using chemicals and solvents, comply with the instructions of the producer and the
general lab safety rules.
WARNING: The centrifuge is not sealed. Use suitable protection measures when using the centrifuge for
infectious and pathogenic samples. Follow appropriate safety precautions when handling these samples.

1.4.4 Exclude the following environmental influences

 Powerful vibrations
 Direct sunlight
 Atmospheric humidity greater than 80%
 Corrosive gases present
 Temperatures below 2 °C and above 35 ° C
 Powerful electric or magnetic fields:
Frontier
TM
Centrifuge FC5714/FC5718/FC5718R/FC5816/FC5816R/FC5916/FC5916R
Four carriers must be used at all times on four place swing out rotors or damage will
occur to the centrifuge. Such damage will not be covered under the product warranty.
Attention! Check the fastening of the rotor nut before each run.
Take off mains plug before opening the housing or the emergency release.
Direction of rotation – clockwise rotation for the rotor drive
Reference for loading rotors

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido