Arregui IGNUM 41010 Manual De Instrucciones página 9

• When the batteries are in position, the screen will come on indicating
"READY" and the system will begin to scan the circuit.
• Then the date and time information can be introduced for the safe to be
updated (SEE POINT C).
• It is also advisable to now change the code for opening (SEE POINT D).
B.2. NORMAL OPENING:
• Press the # key.
• Introduce the code for opening of between 4 and 8 digits (either your
personal code or the code 1234 if you have not changed the original
one).
• Press the # key.
• You will hear three beeps and the display will show "OPEN".
• Turn the knob clockwise and pull it towards you to open the door.
B.3. OPENING WITHOUT THE CODE OR EMERGENCY OPENING:
If you forget the code for opening, the safe can be opened using the
emergency key.
• Pop the emergency lock cover off the face plate by inserting a paperclip
into the hole under the digital display panel. (See
• Insert the emergency key and turn counterclockwise.
• Turn the knob clockwise and pull it towards you to open the door.
• Once the safe is open, press the red button on the back of the door. This
way the code 1234 is activated by default.
• Change the code for opening (SEE POINT D).
B.4. CLOSING THE SAFE:
To close the safe, push the door and turn the knob counterclockwise.
C. INTRODUCING DATE AND TIME
The date and time information is shown on the screen in the following
order: YEAR – MONTH – DAY / TIME / DAY OF THE WEEK.
To introduce the date and time information, the screen must be off. Go
through the following steps:
).
5
<EN>