Basic Functions Of The Sennheiser Operating Menu - Sennheiser evolution wireless Serie Operación Manual

68

Basic functions of the Sennheiser operating menu

A special feature of the Sennheiser evolution wireless series ew 100 is the
similar operation of transmitters and receivers. In stressfull situations, for
example on stage or during a live show or presentation, it is important that
the devices are easy to operate and that adjustments to the settings can be
made quickly and "without looking". Therefore, the necessary operating steps
for each device are similar.
Important:
With the buttons you can directly switch between the factory-
/
preset frequencies (channels presets). The display starts flashing.
Your selection becomes effective immediately.
Press the SET button to enter the top menu level:
By briefly pressing
After approx. one second, the selected menu appears on the display
and then the current setting of the menu is indicated.
Press the / buttons to adjust the settings of the selected menu:
The new setting starts flashing on the display. If you return to the
previous setting, the flashing stops.
Important:
New settings become effective immediately and will be
retained in memory on switch-off!
N.B.: When changing transmitter frequencies, care should be
taken to avoid causing interference to other channels/users.
In the "TUNE" menu, the / buttons feature a "fast search" function.
By briefly pressing the / buttons, the display jumps either forwards
or backwards to the next setting. If you hold down a button, the cycling
of the display is continously accelerted. If you release the button and
start over again, the cycling of the display restarts at normal speed.
The "fast search" function allows you to get fast and easily to your
desired setting.
Press the SET button to return to the top menu level:
Have you finished your entries? Press the
top menu level. The display then switches back to the standard setting.
SET again, you can change to the next menu.
SET button to return to the