Cleaning And Storage - Honeywell Miller Instrucciones De Uso

Harness Connector - The slide buttons must
operate effectively, freeing and locking the
captured pin as required. The captured pin
must not be able to be disconnected from the
harness connector.
Evidence of defects in or damage to the
housing and/or loose/missing fasteners.
Evidence of deployed or activated fall load
indicators.
TurboLite Edge Personal Fall Limiters are
equipped with a load indicator built into the
harness connector. When subjected to fall
arrest forces the harness connector will
separate as shown in the drawing below.
WARNING
returned for service in accordance with
ther use.
6.2 Maintenance
Basic care of all fall protection equipment will
prolong its service life and will contribute to-
ward the performance of its vital safety func-
tion.
Servicing
Servicing of Honeywell Miller self-retracting
lifelines must only be carried out by Honeywell
Industrial Safety or persons or entities
authorized in writing by Honeywell. A record
log of all servicing and inspection dates for
this device must be maintained. Only original
Honeywell replacement parts are approved
for use in this device. Contact your Honeywell
distributor or call Honeywell Technical Service
at 1-800-873-5242 for a return authorization
number.
Honeywell Miller self-retracting lifelines
eywell Miller self-retracting lifelines. ANSI
Z359.14 and CSA Z259.2.2 standards are
voluntary; and ultimately, the end-user/com-
pany must elect to follow the inspection and
-
-
pliant with the standard.

Cleaning and Storage

-
This device must be kept clean and free of
contaminants. Periodically clean the exterior
of the device and wipe the lifeline using a
damp cloth and mild detergent.
When not in use, equipment shall be stored
in a manner as to preclude damage from
environmental factors, such as temperature,
-
light, UV, excessive moisture, oil, chemicals
and their vapors, or other degrading elements.
the device when not in use.
-
-
13