JF 9000 S2 Manual Técnico De Operación página 29

OPERATION TECHNICAL MANUAL - FORAGE WAGON JF 9000 S2
Drive chains lubrication
Keep the chains (previous page) clean. Whenever there is need, wash them with kerosene or
diesel oil and a brush. Following, dry them with compressed air or natural flowing off.
Apply a thin coat of oil proper for chains as MAXLUB ND-03 Bardahl.
If available, use a lubricant special for chains (grease in spray). Because it provides a better
lubrication between the pins and rollers of the chain.
NOTE: Do not use ordinary grease in the chain, because it does not penetrate in the links and
pins.
29