JF 9000 S2 Manual Técnico De Operación página 31

OPERATION TECHNICAL MANUAL - FORAGE WAGON JF 9000 S2
Tension adjustment
2 3
This adjustment is carried through the tension spindles
(2). For that, release the counter-nuts (3) and turn the
nuts (4) clockwise.
NOTE: Evenly adjust the three tension spindle.
To make sure the spindles are evenly adjusted,
measure the distance (A) between the shaft (5) and the
beam (6).
If the measurements are the same size, retighten the
counter-nuts (3). Otherwise, repeat the procedure.
4
5
2
6
6
5
Central chain
Lateral chain
31