TEC29, TEC29LPG
5
Accessories
Available as accessories (not included in the scope of delivery):
Part designation
TEC29 only: AG 101, tank 15 l, plastic
TEC29 only: AG 100, tank 20 l, stainless steel
TEC29 only: AG 150, pipe set for AG 100 / AG 101
AG 125, flexible metal pipe for extending exhaust pipe, 1 mm
AG 111, battery charge controller
6
Intended use
The TEC29 (item no. 9102900200) and TEC29LPG (item no. 9102900179
generators are designed for use in
commercial use.
The generator is not suitable for installation in water vessels.
The generator produces a pure sine wave voltage of 230 V/50 Hz which can
be connected to the consumer with a total continuous load of 2600 W. The
power quality is also suitable for sensitive consumers (such as PCs).
The generator can charge a 12 V battery.
7
Technical description
The TEC29 and TEC29LPG generators consist of the following main parts
(fig. 1, page 2):
Combustion engine (1)
Power generator with permanent magnets (2)
Inverter (3)
Connection box (4)
Control panel (5)
The combustion engine (1) drives the power generator connected to it (2),
which in turn generates AC voltage.
The inverter (3) transforms this AC voltage into a stable voltage of 230 V and
50 Hz, which is available at the generator terminal.
The terminals, the socket for the connection cable to the control panel and
the main switch are installed in the connection box (4).
The control panel is used to operate the device (5).
EN
motor homes, camper vans and vehicles for
Accessories
Item number
9102900009
9102900011
9102900003
9102900020
9102900014
)
37