TEC29, TEC29LPG
8.2
Switching the generator to standby or no function
The generator can be switched to standby or no function with the main switch
(fig. 2 1, page 3) in the connection box.
8.3
Switching the control panel on and off
This switch on the control panel (fig. 3 2, page 3) is for switching the control
panel on and off.
➤ Switch the control panel on with the on/off switch.
✓ The display shows:
The display switches off automatically after 5 minutes if the start button is
not touched within this time.
Press the start button to switch on the display again.
✓ The generator can now be started.
8.4
Starting the generator
The generator can only be started if it is in standby and the control panel is
switched on.
NOTE
I
If the generator is still warm, press the start button briefly to start it;
press longer for a cold generator.
➤ Start up the generator with the start button (fig. 3 3, page 3).
8.5
Stopping the generator
➤ Stop the generator with the on/off switch (fig. 3 2, page 3).
If the generator does not stop: switch it off with the main switch (fig. 2 1,
page 3).
EN
.
GEN OFF
Operating the generator
41