3. Remove the three screws and then remove the
top hinge that holds the door in place. Lift the
door and place it on a padded surface to prevent
it from being scratched.
5. Remove the adjustable foot from another side of
the bottom and transfer it to the corresponding
position on the opposite side of the bottom.
7. Carefully set the door back into place. Ensure
the door is aligned horizontally and vertically so
that the seals are closed on all sides before
finally tightening the top hinge.
Insert the hinge back and screw it to the
top of the appliance.
12
4. Remove the bottom screw, hinge bracket and
adjustable foot from the bottom of the
appliance.
6. Attach the screws, hinge bracket and
adjustable foot to the opposite side of the
bottom. Loosely secure.
8. Use a spanner to tighten it if necessary.
GB