Festo CLR-12 Instrucciones De Utilizacion página 26

CLR−...
Fitting the CLR−...
Place the CLR−... so that no objects project into the swivel range of the
S
clamping finger.
Select one of the fastening possibilities listed in the following table.
S
Double screw connector with foot
fastening type HNA−... in the threaded
holes of the cover screws
Fig. 16
The different product sizes have connector threads of the following design and
with the following tightening torques:
CLR−...
Connecting thread
Tightening torque [Nm]
Fig. 17
Tighten the screws evenly.
S
26
With four screws in the threaded
holes of the cover screws:
12 16 20
M4 M4 M5
2.5 2.5 3
with flange mounting type FNC−...
direct fastening
25 32 40
M5 M6 M6
3 6 6
Festo CLR−... 0604c English
50 63
M8 M8
11 11