Electric Diagram; Warranty Conditions - Lavorwash TUSCON Manual De Uso

página de 105

/ 105
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

• CAUTION: Make use only of liquid deter-

gent, do not absolutely use acid or too

much alkaline products. We suggest you to

make use of our products, which have been

studied for the use with washer machines.

• CAUTION: For proper use of the tank, do

not introduce flammable or chemically

harsh substances.

The adjusting head allow you to select water

jet at low and high pressure. Pressure can be

adjusted by acting on nozzle knob (pict.17):

pict."B" means low pressure, "A" means high

pressure. The selection of low or high pressure

shall be carried out with gun in closed posi-

tion. The detergent suction is automatic when

the adjusting head of the lance is positioned

for low pressure operation. When you start the

machine, the mixing of the detergent with the

water is automatic at the water passage.

APPLIANCES PROVIDED WITH THER-

MAL VALVE (OPTIONAL)

This device enables the machine's by-pass op-

eration through automatic water discharge

whenever it reaches a temperature of nearly

60°C and cooling working components.

• CAUTION: appliances that are not provided

with this disposal must not operate for more

than 2 minutes with released gun. Recycled

water raises its temperature remarkably caus-

ing great damages to the pump.

GUN SAFETY DEVICE

Whenever the machine has to be stopped, it is im-

portant to engage the safety catch (pict.14, pos.

S) on the gun so that it cannot be operated ac-

cidentally.

> STORAGE

(pict.17,18,19,20)

- Move the machine only by grasping the carrying

handle

- Store the appliance and the accessories in a frost-

safe room.

Appliances and accessories that are not completely

drained can be destroyed by frost. Completely

drain appliance and accessories and protect them

against frost.

To avoid damage:

- Detach the appliance from the water supply.

- Detach spray lance from the trigger gun.

- Switch the appliance on ("I/ON"), press the trig-

ger gun lever until no further water is discharged

(approx. 1 min). - Turn off the appliance (pict.21).-

Store the appliance and the entire accessories in a

frost free room (pict.22).

CARE AND MAINTENANCE

SCHEDULED MAINTENANCE PLAN

Visit www.lavorservice.com website and

download the scheduled maintenance

IMPORTANT: Before doing any work on

the cleaner, discharge the pressure and dis-

connect the electricity and water supplies.

CHECKING THE PUMP OIL LEVEL

Check the oil level periodically. The oil must be

changed for the first time after 50 working hours,

with subsequent changes every 500 hours. SAE

20/30 oil is recommended - Oil capacity 0,5 Kg

CHECKING THE WATER INTAKE FILTER

Inspect and clean the water intake filter (pict.23)

on the intake union periodically. This is impor-

tant to prevent fouling which may impair ope-

ration of the pump.

REPLACING THE SPRAY ROD NOZZLE

Replace the nozzle when the pressure drops below

the normal values.

ELECTRICAL CORD

• WARNING: Take care not damage the electric

cable. Have a damaged power cord replaced

immediately by an authorized service point or

an electrical specialist.