Astralpool V-HEAT Serie Manual De Instrucciones página 27

V-HEAT SERIES · AIR/WATER SYSTEM
How to choose the Mode
Cooling Mode
Press "M" to choose (mode can be changed under running)
" "
Press to power on unit. Under running, the LCD displays the water-in temp, water-out temp and current mode.
AUX. Elec. Heating is NOT APPLICABLE FOR THESE MODELS.
How to know the current status
Water Temp. In/Out
"
Under running, press
▲
ambient temperature. If no buttons are depressed within 5 seconds, the LCD will display water-in/water-out temp. When
the unit is switched off, current ambient temperature is displayed.
© ASTRALPOOL 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
Parameter 08. Selection Mode
0 = Cooling only
1 = Cooling and heating
2 = Auxiliary electric heating
3 = Heating only
Parameter 09. Water Pump Control
0 = Always open
1 = 60 seconds start before compressors starting, 30 seconds stop after compressors
stopping
Evaporator 1 Temp.
▲ ▲ ▲ ▲
" " "
to check the current status of the unit. You can check water-in / water-out / evaporator /
Heating Mode
Evaporator 2 Temp.
Auxiliary Electric Heating
Ambient Temp.
ENGLISH
Page 27 of 72